Ferruls

500.00

  • The wall thickness of sizes ½”-3” is 0.065” (16Ga)
  • The wall thickness of 4” is 0.083” (14Ga)

 

  • Clear

Quantity:

SKU: N/A Category:

Description

  • The wall thickness of sizes ½”-3” is 0.065” (16Ga)
  • The wall thickness of 4” is 0.083” (14Ga)
  • The wall thickness of 6” is 0.109” (12Ga)
  • The wall thickness of sizes 10” and 12” is 0.120”
  • Most sanitary fittings are either 304 or 316L stainless steel. More noble alloys such as AL6XN, Titanium and Hastelloy are available in limited quantities and sizes.
  • The quality of the surface finish is categorized by its Ra. Ra is determined by taking the average distance between the peaks and valleys on the metal surface. It is normally measured in micro inches. The minimum Ra measurement needed to render a fitting as “sanitary” is 32. Many industries such as the biopharmaceutical industry require tubing to be the 15-20Ra range.
  • Sanitary fittings do not have any pockets, threads, or tight radii. The radii of sanitary elbows has been standardized. The radius of a sanitary elbow is 1 ½ time the OD of the tube. Thus a 1” elbow has a 1 ½” radius, a 2” elbow has a 3” radius, etc.

 

Additional information

Size

1.5" Clamp, 3/4" Clamp

Grade

A, B, C

There are no reviews yet.

Add your review